Navigation
Supported Platforms
Related Documentation
- M, MX Series
- Configuring Dynamic PPPoE Subscriber Interfaces Using Dynamic Profiles
- MX Series
- Configuring Static Subscriber Interfaces in Dynamic Profiles
- Configuring Dynamic Subscriber Interfaces Using IP Demux Interfaces in Dynamic Profiles
- Configuring Dynamic VLANs Based on Agent Circuit Identifier Information
- Subscriber Interface Overview
- Relationship Between Subscribers and Interfaces in an Access Network
- Additional Information
- For general information about configuring static interfaces, see the Junos® OS Network Interfaces
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces
interfaces (Static and Dynamic Subscribers)
Syntax
interfaces {interface-name {unit logical-unit-number { auto-configure {agent-circuit-identifier {dynamic-profile profile-name;}}family family {access-concentrator name;address address;duplicate-protection;dynamic-profile profile-name;filter {adf {counter;input-precedence precedence;not-mandatory;output-precedence precedence;rule rule-value;}input filter-name (precedence precedence;shared-name filter-shared-name;}output filter-name {precedence precedence;shared-name filter-shared-name;}}max-sessions number;max-sessions-vsa-ignore;rpf-check {mode loose;}service { input { service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output { service-set service-set-name {service-filter filter-name;}}}service-name-table table-nameshort-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;unnumbered-address interface-name <preferred-source-address address>;}filter {input filter-name;shared-name filter-shared-name;output filter-name;shared-name filter-shared-name;}ppp-options {chap;pap;}proxy-arp;vlan-id;vlan-tags outer [tpid].vlan-id [inner [tpid].vlan-id];}vlan-tagging;}interface-set interface-set-name {interface interface-name {unit logical-unit-number;}pppoe-underlying-options {max-sessions number;}}demux0 {unit logical-unit-number {demux-options {underlying-interface interface-name}family family {access-concentrator name;address address;duplicate-protection;dynamic-profile profile-name;demux-source {source-prefix;}filter{input filter-name (precedence precedence;shared-name filter-shared-name;}output filter-name {precedence precedence;shared-name filter-shared-name;}}mac-validate (loose | strict):max-sessions number;max-sessions-vsa-ignore;rpf-check {fail-filter filter-name;mode loose;}service-name-table table-nameshort-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;unnumbered-address interface-name <preferred-source-address address>;}filter {input filter-name;output filter-name;}vlan-id number;vlan-tags outer [tpid].vlan-id [inner [tpid].vlan-id];}}pp0 {unit logical-unit-number {keepalives interval seconds;no-keepalives;pppoe-options {underlying-interface interface-name;server;}ppp-options {authentication [ authentication-protocols ];chap {challenge-length minimum minimum-length maximum maximum-length;}pap;}family inet {unnumbered-address interface-name destination address;address address;service {input {service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output {service-set service-set-name {service-filter filter-name;}}}filter {input filter-name {precedence precedence;shared-name filter-shared-name;}output filter-name {precedence precedence;shared-name filter-shared-name;}}}}}}
Hierarchy Level
[edit dynamic-profiles profile-name]
Release Information
Statement introduced in Junos OS Release 9.2.
Description
Define interfaces for dynamic profiles.
Options
interface-name—The interface variable ($junos-interface-ifd-name). The interface variable is dynamically replaced with the interface the DHCP client accesses when connecting to the router.
![]() | Note: Though we do not recommend it, you can also enter the specific name of the interface you want to assign to the dynamic profile. |
The remaining statements are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M, MX Series
- Configuring Dynamic PPPoE Subscriber Interfaces Using Dynamic Profiles
- MX Series
- Configuring Static Subscriber Interfaces in Dynamic Profiles
- Configuring Dynamic Subscriber Interfaces Using IP Demux Interfaces in Dynamic Profiles
- Configuring Dynamic VLANs Based on Agent Circuit Identifier Information
- Subscriber Interface Overview
- Relationship Between Subscribers and Interfaces in an Access Network
- Additional Information
- For general information about configuring static interfaces, see the Junos® OS Network Interfaces
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces
Published: 2012-12-11
Supported Platforms
Related Documentation
- M, MX Series
- Configuring Dynamic PPPoE Subscriber Interfaces Using Dynamic Profiles
- MX Series
- Configuring Static Subscriber Interfaces in Dynamic Profiles
- Configuring Dynamic Subscriber Interfaces Using IP Demux Interfaces in Dynamic Profiles
- Configuring Dynamic VLANs Based on Agent Circuit Identifier Information
- Subscriber Interface Overview
- Relationship Between Subscribers and Interfaces in an Access Network
- Additional Information
- For general information about configuring static interfaces, see the Junos® OS Network Interfaces
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces