Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- show ipv6 neighbors
- M, MX, PTX, T Series
- IPv6 Neighbor Discovery Overview
nd6-stale-time
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1.
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Description
Set the stale timer for IPv6 neighbor reachability confirmation. Reachability of the IPv6 neighbors is confirmed only after the stale timer has expired. For example, by setting the stale timer to 180 seconds, users can specify that IPv6 neighbor reachability be confirmed every 180 seconds.
 | Note: When the Routing Engine sends a control packet to an IPv6 neighbor, the stale timer is the maximum interval in which neighbor reachability is confirmed. In such cases, IPv6 neighbor reachability is confirmed before the stale timer expires. |
Default
Default is 20 minutes (1200 seconds)
Options
seconds | — | Duration in seconds. |
Range: 1 to 1200
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- show ipv6 neighbors
- M, MX, PTX, T Series
- IPv6 Neighbor Discovery Overview
Published: 2012-12-06
Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- show ipv6 neighbors
- M, MX, PTX, T Series
- IPv6 Neighbor Discovery Overview
