Navigation
Supported Platforms
Related Documentation
[edit protocols link-management] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit protocols link-management] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.
This topic lists:
Supported Statements in the [edit protocols link-management] Hierarchy Level
The following hierarchy shows the [edit protocols link-management] configuration statements supported on EX Series switches:
protocols {link-management {peer peer-name {address address;control-channel [ control-channel-interfaces ];lmp-control-channel interface-name {remote-address address;}lmp-protocol {hello-dead-interval milliseconds;hello-interval milliseconds;passive;retransmission-interval milliseconds;retry-limit number;}te-link [ te-link-names ];}te-link te-link-name {disable;interface interface-name {disable;local-address address;remote-address address;remote-id id-number;}label-switched-path lsp-name {disable;local-address address;remote-address address;remote-id id-number;}local-address address;remote-address address;remote-id id-number;te-metric metric;}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag;}}}
Unsupported Statements in the [edit protocols link-management] Hierarchy Level
All statements in the [edit protocols link-management] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented.
