Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

Autoinstallation Configuration of ACX Series Universal Access Routers

No configuration is required on a router on which you are performing autoinstallation because it is an automated process. However, to simplify the process, you can specify one or more interfaces, protocols, and configuration servers to be used for autoinstallation.

To configure autoinstallation:

  1. Specify the URL address of one or more servers from which to obtain configuration files.
    [edit system]
    user@host# set autoinstallation configuration-servers tftp://tftpconfig.sp.com

    Note: You can also use an HTTP or FTP address—for example, http://user:password@httpconfig.sp.com or ftp://user:password@sftpconfig.sp.com.

  2. Configure one or more Ethernet interfaces to perform autoinstallation and IP address acquisition protocols for each interface. The router uses the protocols to send a request for an IP address for the interface:
    [edit system]
    user@host# set autoinstallation interfaces ge-0/0/0 bootp
 

Related Documentation

 

Published: 2013-01-11

Previous Page Next Page