Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

Verifying Autoinstallation on ACX Series Universal Access Routers

Purpose

After you have configured autoinstallation, display the status of autoinstallation on an ACX Series router.

Action

From the CLI, enter the show system autoinstallation status command.

Sample Output

user@host> show system autoinstallation status 
 Autoinstallation status:
    Master state: Active
    Last committed file: None
    Configuration server of last committed file: 10.25.100.1
    Interface:
      Name: ge-0/1/0
      State: Configuration Acquisition
      Acquired:
        Address: 192.168.124.75
        Hostname: host-ge-000
        Hostname source: DNS
        Configuration filename: router-ge-000.conf
        Configuration filename server: 10.25.100.3
      Address acquisition:
        Protocol: DHCP Client
        Acquired address: None
        Protocol: RARP Client
        Acquired address: None
    Interface:
      Name: ge-0/1/1
      State: None
      Address acquisition:
        Protocol: DHCP Client
        Acquired address: None
        Protocol: RARP Client
        Acquired address: None

Meaning

The output shows the settings configured for autoinstallation. Verify that the values displayed are correct for the router when it is deployed on the network.

 

Related Documentation

 

Published: 2013-01-11

Previous Page Next Page