TechLibrary

Navigation

Supported Platforms

To configure an L2TP LAC:

Configure a tunnel profile to apply to subscribers.
See Configuring a Tunnel Profile for Subscriber Access.
(Optional) Configure the method used for selecting among multiple tunnels.
(Optional) Configure the LAC to not send Calling Number AVP 22 to the LNS.
See Preventing the LAC from Sending Calling Number AVP 22 to the LNS.
(Optional) Specify the method for setting the transmit and receive connect speeds.
See Configuring the Method to Set the LAC Connection Speeds to the LNS.
(Optional) Disable negotiation of the L2TP failover protocol to force use of only the silent failover resynchronization mechanism.
See Preventing the LAC From Negotiating L2TP Failover Protocol.
(Optional) Specify the format for the tunnel name.
Setting the Format for the Tunnel Name.
(Optional) Specify how many times L2TP retransmits unacknowledged control messages.
See Configuring the Number of L2TP Control Message Retransmissions.
(Optional) Specify how long a tunnel can remain idle before being torn down.
See Setting the L2TP Tunnel Idle Timeout.
(Optional) Specify how long the L2TP retains information about terminated dynamic tunnels, sessions, and destinations.
See Setting the L2TP Destruct Timeout.
(Optional) Configure trace options for troubleshooting the configuration.
See Tracing L2TP Operations for Subscriber Access