Navigation
Managing Continuity Measurement Statistics
Displaying Continuity Measurement Statistics
Purpose
Display continuity measurement.
The show oam ethernet connectivity-fault-management delay-statistics maintenance-domain md1 maintenance-association ma1 command is enhanced to display continuity measurement statistics for MEPs in the specified CFM maintenance association (MA) within the specified CFM maintenance domain (MD).
Action
- To display the ETH-DM statistics collected for MEPs belonging
to MA ma1 and within MD md1:
user@host> show oam ethernet connectivity-fault-management delay-statistics maintenance-domain md1 maintenance-association ma1
Clearing Continuity Measurement Statistics
Purpose
Clear the continuity measurement statistics
By default, statistics are deleted for all MEPs attached to CFM-enabled interfaces on the router. However, you can filter the scope of the command by specifying an interface name.
Action
- To clear the continuity measurement statistics for all
MEPs attached to CFM-enabled interfaces on the router:
user@host> clear oam ethernet connectivity-fault-management continuity-measurement maintenance-domain md-name maintenance-association ma-name local-mep local-mep-id remote-mep remote-mep-id