Navigation
Display Extensive Status Information for a Specific T1 Interface
Purpose
To display extensive status information about a specific T1 interface.
Action
To display extensive status information about a specific T1 interface, use the following Junos OS CLI operational mode command:
user@host> show interfaces t1-fpc/pic/port extensive
Sample Output
user@host> show interfaces t1-1/1/0 extensive Physical interface: t1-1/1/0, Enabled, Physical link is Down
Interface index: 24, SNMP ifIndex: 20, Generation: 27
Link-level type: PPP, MTU: 1504, Clocking: Internal, Speed: T1, Loopback: None, FCS: 16, Framing: ESF
Device flags : Present Running Down
Interface flags: Hardware-Down Point-To-Point SNMP-Traps
Link flags : Keepalives
Hold-times : Up 0 ms, Down 0 ms
Last flapped : 2002-01-01 00:00:35 UTC (00:01:00 ago)
Statistics last cleared: 2002-01-01 00:01:03 UTC (00:00:32 ago)
Traffic statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Input errors :
Errors: 0, Drops: 0, Framing errors: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0,
HS link CRC errors: 0, SRAM errors: 0
Output errors :
Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0
DS1 alarms : LOF, LOS
DS1 defects : LOF, LOS
T1 media : Seconds Count State
SEF 32 0 Defect Active
BEE 0 0 OK
AIS 0 0 OK
LOF 32 0 Defect Active
LOS 32 0 Defect Active
YELLOW 0 0 OK
BPV 0 0
EXZ 0 0
LCV 0 0
PCV 32 10667
CS 0 0
LES 0
ES 32
SES 32
SEFS 32
BES 0
UAS 32
HDLC configuration:
Policing bucket: Disabled
Shaping bucket : Disabled
Giant threshold: 1514, Runt threshold: 3
Timeslots : All active
Line encoding: B8ZS, Byte encoding: Nx64K, Data inversion: Disabled
Buildout : 0 to 132 feet
DS1 BERT configuration:
BERT time period: 10 seconds, Elapsed: 0 seconds
Induced Error rate: 10e-0, Algorithm: Unknown (0)
Packet Forwarding Engine configuration:
Destination slot: 1, PLP byte: 1 (0x00)
CoS transmit queue Bandwidth Buffer Priority Limit
% bps % bytes
0 best-effort 0 0 0 0 low none
1 expedited-forwarding 0 0 0 0 low none
2 assured-forwarding 0 0 0 0 low none
3 network-control 0 0 0 0 low none
Meaning
The sample output shows where the errors might be occurring. Look at the active alarms and active defects for the T1 interface and investigate the T1 media accordingly. See Checklist for T1 Alarms and Errors for an explanation of T1 alarms.
