Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

Configuring Physical ATM Interfaces and Logical Interface Properties for ADSL

To configure physical ATM interfaces for ADSL, include the vpi 0 statement at the [edit interfaces at-pim/0/port atm-options] hierarchy level, the operating-mode statement at the [edit interfaces at-pim/0/port dsl-options] hierarchy level, and the encapsulation statement at the [edit interfaces at-pim/0/port] hierarchy level:

[edit interfaces at-pim/0/port]atm-options {vpi 0;}dsl-options {operating-mode mode;}encapsulation (atm-pvc | ethernet-over-atm);

Configure logical interface properties by including the encapsulation statement, family statement, and vci statement:

unit logical-unit-number {encapsulation (atm-vc-mux | atm-nlpd | atm-cisco-nlpd | atm-snap | atm-ppp-vc-mux | atm-ppp-llc | ether-over-atm-llc | ppp-over-ether-over-atm-llc);family inet {vci vpi-identifier.vci-identifier;}}

You can include these statements at the following hierarchy levels:

  • [edit interfaces interface-name unit logical-unit-number]
  • [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

Published: 2012-12-05