Navigation
Configuring the Serial DTR Circuit
A balanced circuit has two currents that are equal in magnitude and opposite in phase. An unbalanced circuit has one current and a ground; if a pair of terminals is unbalanced, one side is connected to electrical ground and the other carries the signal. By default, the DTR circuit is balanced.
For EIA-530 and V.35 interfaces, configure the DTR circuit by including the dtr-circuit statement:
dtr-circuit (balanced | unbalanced);
You can include this statement at the following hierarchy levels:
- [edit interfaces se-pim/0/port serial-options]
- [edit interfaces se-fpc/pic/port serial-options]
