Navigation
Supported Platforms
Related Documentation
- ACX, J, M, MX, QFX, SRX, T Series
- Example: Injecting OSPF Routes into the BGP Routing Table
- J, M, PTX, SRX, T Series
- Routing Policy Match Conditions
- Default Policies and Actions
- J, M, SRX, T Series
- Routing Policies Configuration Overview
Protocol-Based Match Conditions
You can specify a match condition for policies based on protocols by naming a protocol from which the route is learned or to which the route is being advertised. You can specify one of the following protocols: aggregate, BGP, direct, DVMRP, IS-IS, local, OSPF, PIM-dense, PIM-sparse, RIP, or static.
Related Documentation
- ACX, J, M, MX, QFX, SRX, T Series
- Example: Injecting OSPF Routes into the BGP Routing Table
- J, M, PTX, SRX, T Series
- Routing Policy Match Conditions
- Default Policies and Actions
- J, M, SRX, T Series
- Routing Policies Configuration Overview
Published: 2013-02-10
Supported Platforms
Related Documentation
- ACX, J, M, MX, QFX, SRX, T Series
- Example: Injecting OSPF Routes into the BGP Routing Table
- J, M, PTX, SRX, T Series
- Routing Policy Match Conditions
- Default Policies and Actions
- J, M, SRX, T Series
- Routing Policies Configuration Overview
