Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Supported Platforms

    Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks

    Table 1 describes configuration tasks that are specific to IPv4 and IPv6 dual-stack networks. It does not represent a complete router configuration.

    Table 1: Overview of Configuration Tasks for IPv4 and IPv6 Dual-Stack in Subscriber Access Networks

    Purpose of Task

    Procedure

    Create a loopback interface for use in the subscriber access network.

    Configuring a Loopback Interface

    Configure DHCPv6 over the PPPoE IPv6 family.

    Configuring a DHCPv6 Local Server for DHCPv6 over PPPoE

    For PPPoE access networks that use DHCP addressing, create a dynamic profile that allows IPv4 and IPv6 subscribers to access the network on the same logical interface.

    Configuring a PPPoE Dynamic Profile for Use with DHCP Addressing in a Dual-Stack Network

    For PPPoE access networks that use NDRA addressing, configure a dynamic profile that allows IPv4 and IPv6 subscribers to access the network on the same logical interface.

    Configuring a PPPoE Dynamic Profile for Use with NDRA in a Dual-Stack Network

    For static NDRA configurations, create a static PPPoE logical interface.

    Configuring a Static PPPoE Logical Interface for NDRA

    Create a pool of IPv6 prefixes that are used in router advertisements.

    Configuring an Address-Assignment Pool Used for Router Advertisements

    Enable duplicate prefix protection for IPv6 prefixes used in router advertisements.

    Configuring Duplicate Prefix Protection for Router Advertisement

    Create a pool of IPv6 prefixes for use by DHCPv6 prefix delegation.

    Configuring an Address-Assignment Pool for Use by DHCPv6 Prefix Delegation

    Create a pool of global IPv6 addresses for use by DHCPv6 IA_NA.

    Configuring an Address-Assignment Pool for Use by DHCPv6 IA_NA

    Specify a specific address assignment pool to be used by DHCPv6 prefix delegation.

    Specifying the Delegated Address-Assignment Pool to Be Used for DHCPv6 Prefix Delegation

    Save IPv4 addresses for dual-stack PPP Subscribers

    Configuration Tasks IPv4 Addresses Saved for Dual-Stack PPP Subscribers

    Configure AAA to exclude specific attributes from Acct-Start or Acct-Stop messages.

    Suppressing Accounting Information That Comes from AAA

    Published: 2013-07-09

    Supported Platforms

    Published: 2013-07-09