Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

English  

English

Example: Configuring a Dynamic PPPoE Subscriber Interface on a Dynamic Underlying VLAN Demux Interface over Aggregated Ethernet

Requirements

• MX Series 3D Universal Edge Routers
• MPCs
• Junos OS Release 11.2 or later

No special configuration beyond device initialization is required before you can configure this feature.

Overview

Aggregated Ethernet bundles enable link redundancy between the router and networking devices connected by Ethernet links. This example describes how to configure link redundancy for dynamic PPPoE subscribers over aggregated Ethernet with an intermediate dynamic VLAN demux interface. Sample tasks include configuring a two-member aggregated Ethernet bundle, configuring dynamic profiles that establish the dynamic VLAN demux interface that underlies the PPPoE subscriber interface, and configuring the dynamic profile that establishes the dynamic PPPoE subscriber interfaces.

• $junos-interface-unit—Represents the logical unit number of the dynamic VLAN demux interface. This predefined variable is dynamically replaced with the unit number supplied by the router when the subscriber logs in.
• $junos-interface-ifd-name—Represents the underlying logical interface on which the PPPoE subscriber interface is created. This predefined variable is dynamically replaced with the name of the underlying interface supplied by the router when the subscriber logs in.
• $junos-vlan-id—Represents the VLAN identifier. This predefined variable is dynamically replaced with a VLAN ID when the subscriber logs in. The VLAN ID is allocated within the VLAN range specified in the aggregated Ethernet configuration. In the case of the S-VLAN demux, $junos-vlan-id represents the inner VLAN identifier.
• $junos-stacked-vlan-id—Represents the outer VLAN identifier for the stacked VLAN. This predefined variable is dynamically replaced with a VLAN ID when the subscriber logs in. The VLAN ID is allocated within the VLAN range specified in the aggregated Ethernet configuration. This variable is not used for the VLAN demux configuration.

• $junos-interface-unit—Represents the logical unit number of the dynamic PPPoE logical interface. This predefined variable is dynamically replaced with the unit number supplied by the router when the subscriber logs in.
• $junos-underlying-interface—Represents the name of the underlying Ethernet interface. This predefined variable is dynamically replaced with the interface name supplied by the router when the subscriber logs in.

This example does not show all possible configuration choices.

Configuration

CLI Quick Configuration

To quickly configure link redundancy for dynamic PPPoE subscribers over a dynamic VLAN demux interface over aggregated Ethernet, copy the following commands, paste them in a text file, remove any line breaks, and then copy and paste the commands into the CLI.

Step-by-Step Procedure

1. Define the number of aggregated Ethernet devices on the router.
   [edit chassis]user@host# set aggregated-devices ethernet device-count 1
2. Configure a two-link aggregated Ethernet logical interface to serve as the underlying interface for the dynamic VLAN demux subscriber interface. In this example, the LAG bundle is configured for one-to-one active/backup link redundancy. To support link redundancy at the MPC level, the LAG bundle attaches to ports from two different MPCs.
   [edit interfaces]user@host# set ge-5/0/3 gigether-options 802.3ad ae0user@host# set ge-5/0/3 gigether-options 802.3ad primaryuser@host# set ge-5/1/2 gigether-options 802.3ad ae0user@host# set ge-5/1/2 gigether-options 802.3ad backup
3. Enable link protection on the aggregated Ethernet logical interface and configure support for single and dual (stacked) VLAN tags.
   [edit interfaces]user@host# set ae0 aggregated-ether-options link-protectionuser@host# set ae0 flexible-vlan-tagging
4. Configure the parameters for automatically configuring VLANs and S-VLANs, including the VLAN ranges and dynamic profiles.
   [edit interfaces]user@host# set ae0 auto-configure vlan-ranges dynamic-profile vlan-profile accept pppoeuser@host# set ae0 auto-configure vlan-ranges dynamic-profile vlan-profile ranges 1-4094user@host# set ae0 auto-configure stacked-vlan-ranges dynamic-profile svlan-profile accept pppoeuser@host# set ae0 auto-configure stacked-vlan-ranges dynamic-profile svlan-profile ranges 1-4094,1-4094
5. Configure the dynamic profile that creates the PPPoE subscriber interface.
   [edit dynamic-profiles pppoe-profile]user@host# edit interfaces pp0 unit $junos-interface-unit[edit dynamic-profiles pppoe-profile interfaces pp0 unit "$junos-interface-unit"]user@host# set pppoe-options underlying-interface $junos-underlying-interfaceuser@host# set pppoe-options serveruser@host# set family inet unnumbered-address lo0.0
6. Configure the dynamic profile that creates VLAN demux underlying interfaces, including the PPPoE family attributes.
   [edit dynamic-profiles vlan-profile]user@host# edit interfaces demux0 unit $junos-interface-unit[edit dynamic-profiles vlan-profile interfaces demux0 unit "$junos-interface-unit"]user@host# set vlan-id $junos-vlan-iduser@host# set demux-options underlying-interface $junos-interface-ifd-nameuser@host# set family pppoe access-concentrator pppoe-server-1user@host# set family pppoe duplicate-protectionuser@host# set family pppoe dynamic-profile pppoe-profile
7. Configure the dynamic profile that creates S-VLAN demux underlying interfaces, including the PPPoE family attributes.
   [edit dynamic-profiles svlan-profile]user@host# edit interfaces demux0 unit $junos-interface-unit[edit dynamic-profiles svlan-profile interfaces demux0 unit "$junos-interface-unit"]user@host# set vlan-tags outer $junos-stacked-vlan-iduser@host# set vlan-tags inner $junos-vlan-iduser@host# set demux-options underlying-interface $junos-interface-ifd-nameuser@host# set family pppoe access-concentrator pppoe-server-1user@host# set family pppoe duplicate-protectionuser@host# set family pppoe dynamic-profile pppoe-profile

Results

From configuration mode, confirm the aggregated device configuration by entering the show chassis command. Confirm the interface configuration by entering the show interfaces command. Confirm the dynamic profile configuration by entering the show dynamic-profiles command. If the output does not display the intended configuration, repeat the configuration instructions in this example to correct it.

If you are done configuring the device, enter commit from configuration mode.

Verification

To confirm that the configuration is working properly, perform this task:

• Verifying the Aggregated Ethernet Interface Configuration

Verifying the Aggregated Ethernet Interface Configuration

Purpose

Verify that the interface values match your configuration, the link is up, and traffic is flowing.

Action

From operational mode, enter the show interfaces redundancy command.

Interface  State            Last change  Primary      Secondary    Current status
ae0        On primary                    ge-5/0/3     ge-5/1/2     both up

From operational mode, enter the show interfaces ae0 command.

Physical interface: ae0, Enabled, Physical link is Up
  Interface index: 128, SNMP ifIndex: 606
  Link-level type: Ethernet, MTU: 1522, Speed: 1Gbps, BPDU Error: None,
  MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
  Flow control: Disabled, Minimum links needed: 1, Minimum bandwidth needed: 0
  Device flags   : Present Running
  Interface flags: SNMP-Traps Internal: 0x4000
  Current address: 00:1f:12:b8:ef:c0, Hardware address: 00:1f:12:b8:ef:c0
  Last flapped   : 2011-03-11 13:24:18 PST (2d 03:34 ago)
  Input rate     : 1984 bps (2 pps)
  Output rate    : 0 bps (0 pps)

  Logical interface ae0.32767 (Index 69) (SNMP ifIndex 709)
    Flags: SNMP-Traps 0x4004000 VLAN-Tag [ 0x0000.0 ]  Encapsulation: ENET2
    Statistics        Packets        pps         Bytes          bps
    Bundle:
        Input :        371259          2      46036116         1984
        Output:             0          0             0            0
    Protocol multiservice, MTU: Unlimited
      Flags: Is-Primary

Meaning

The show interfaces redundancy output shows the redundant link configuration and that both link interfaces are up. The show interfaces ae0 output shows that the aggregated Ethernet interface is up and that traffic is being received on the logical interface.