Navigation
Related Documentation
- T Series
- Routing Matrix with a TX Matrix Router FPC Numbering
- Overview of the Routing Matrix with a TX Matrix Router
- Roadmap to Configuring a Routing Matrix with a TX Matrix Router
- Example: Routing Matrix with a TX Matrix Router Configuration
- Additional Information
- Routing Matrix with a TX Matrix Router
Adjusting the Configuration to Accommodate Increased FPC Numbers in a Routing Matrix with a TX Matrix Router
You must adjust the routing matrix with a TX Matrix router configuration to accommodate increased FPC numbers.
For example, if you have a Gigabit Ethernet interface installed in FPC slot 7, PIC slot 0, port 0 of T640 router LCC 3, you can configure this interface on the TX Matrix router by including the ge-31/0/0 statement at the [edit interfaces] hierarchy level.
[edit]interfaces {ge-31/0/0 {unit 0 {family inet {address ip-address;}}}}
For more information about physically connecting T640 routers and a TX Matrix router together in a routing matrix, see the TX Matrix Router Hardware Guide. For more information about the interface-naming conventions for a routing matrix, see the Junos Network Interfaces Configuration Guide.
Related Documentation
- T Series
- Routing Matrix with a TX Matrix Router FPC Numbering
- Overview of the Routing Matrix with a TX Matrix Router
- Roadmap to Configuring a Routing Matrix with a TX Matrix Router
- Example: Routing Matrix with a TX Matrix Router Configuration
- Additional Information
- Routing Matrix with a TX Matrix Router
Published: 2012-11-28
Related Documentation
- T Series
- Routing Matrix with a TX Matrix Router FPC Numbering
- Overview of the Routing Matrix with a TX Matrix Router
- Roadmap to Configuring a Routing Matrix with a TX Matrix Router
- Example: Routing Matrix with a TX Matrix Router Configuration
- Additional Information
- Routing Matrix with a TX Matrix Router
