Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

clear services stateful-firewall sip-call

Syntax

clear services stateful-firewall sip-call<application-protocol protocol><destination-port destination-port> <destination-prefix destination-prefix> <interface interface-name> <protocol protocol><service-set service-set> <source-port source-port><source-prefix source-prefix>

Release Information

Command introduced in Junos OS Release 7.4.

Description

Clear Session Initiation Protocol (SIP) call information in stateful firewall flows.

Options

none
—

Clear stateful firewall statistics for all interfaces and all service sets.

application-protocol
—

(Optional) Clear information about one of the following application protocols:

  • bootp—(SIP only) Bootstrap protocol
  • dce-rpc—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols
  • dce-rpc-portmap—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols portmap service
  • dns—(SIP only) Domain Name System protocol
  • exec—(SIP only) Exec
  • ftp—(SIP only) File Transfer Protocol
  • h323—H.323 standards
  • icmp—Internet Control Message Protocol
  • iiop—Internet Inter-ORB Protocol
  • login—Login
  • netbios—NetBIOS
  • netshow—NetShow
  • realaudio—RealAudio
  • rpc—Remote Procedure Call protocol
  • rpc-portmap—Remote Procedure Call protocol portmap service
  • rtsp—Real-Time Streaming Protocol
  • shell—Shell
  • sip—Session Initiation Protocol
  • snmp—Simple Network Management Protocol
  • sqlnet—SQLNet
  • tftp—Trivial File Transfer Protocol
  • traceroute—Traceroute
  • winframe—WinFrame
destination-port destination-port
—

(Optional) Clear information for a particular destination port. The range of values is 0 to 65535.

destination-prefix destination-prefix
—

(Optional) Clear information for a particular destination prefix.

interface interface-name
—

(Optional) Clear information for a particular adaptive services interface. On M Series and T Series routers, the interface-name can be sp-fpc/pic/port or rspnumber. On J Series routers, the interface-name is sp-pim/0/port.

protocol
—

(Optional) Clear information about one of the following IP types:

  • ah—IPsec Authentication Header protocol
  • egp—An exterior gateway protocol
  • esp—IPsec Encapsulating Security Payload protocol
  • gre—A generic routing encapsulation protocol
  • icmp—Internet Control Message Protocol
  • igmp—Internet Group Management Protocol
  • ipip—IP-within-IP Encapsulation Protocol
  • ipv6—IPv6 within IP
  • ospf—Open Shortest Path First protocol
  • pim—Protocol Independent Multicast protocol
  • rsvp—Resource Reservation Protocol
  • sctp—Stream Control Protocol
  • tcp—Transmission Control Protocol
  • udp—User Datagram Protocol
service-set service-set
—

(Optional) Clear information for a particular service set.

source-port source-port
—

(Optional) Clear information for a particular source port. The range of values is 0 to 65535.

source-prefix source-prefix
—

(Optional) Clear information for a particular source prefix.

Required Privilege Level

view

 

Related Documentation

 

List of Sample Output

clear services stateful-firewall sip-call

Output Fields

Table 1 lists the output fields for the clear services stateful-firewall sip-call command. Output fields are listed in the approximate order in which they appear.

Table 1: clear services stateful-firewall sip-call Output Fields

Field Name

Field Description

Interface

Name of an adaptive services interface.

Service set

Name of the service set from which flows are being cleared.

SIP calls removed

Number of SIP calls removed.

Sample Output

clear services stateful-firewall sip-call

user@host> clear services stateful-firewall sip-call 
Interface   Service set                                        SIP calls removed
sp-0/3/0    test_sip_777                                                       1

Published: 2013-03-14

Previous Page Next Page