Supported Platforms
show class-of-service forwarding-table classifier
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Description
Display the mapping of code point value to queue number and loss priority for each classifier as it exists in the forwarding table.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show class-of-service forwarding-table classifierOutput Fields
Table 1 describes the output fields for the show class-of-service forwarding-table classifier command. Output fields are listed in the approximate order in which they appear.
Table 1: show class-of-service forwarding-table classifier Output Fields
Field Name | Field Description |
|---|---|
Classifier table index | Index of the classifier table. |
entries | Total number of entries. |
Table type | Type of code points in the table: DSCP, EXP (not on the QFX Series), IEEE 802.1, IPv4 precedence (not on the QFX Series), or IPv6 DSCP. |
Entry # | Entry number. |
Code point | Code point value used for classification. |
Forwarding-class # | Forwarding class to which the code point is assigned. |
PLP | Packet loss priority value set by classification. For most platforms, the value can be 0 or 1. For some platforms, the value is 0, 1, 2, or 3. The value 0 represents low PLP. The value 1 represents high PLP. The value 2 represents medium-low PLP. The value 3 represents medium-high PLP. |
Sample Output
show class-of-service forwarding-table classifier
user@host> show class-of-service forwarding-table
classifier Classifier table index: 62436, # entries: 64, Table type: DSCP Entry # Code point Forwarding-class # PLP 0 000000 0 0 1 000001 0 0 2 000010 0 0 3 000011 0 0 4 000100 0 0 5 000101 0 0 6 000110 0 0 7 000111 0 0 8 001000 0 0 9 001001 0 0 10 001010 1 1 11 001011 0 0 ... 60 111100 0 0 61 111101 0 0 62 111110 0 0 63 111111 0 0
