Supported Platforms
show class-of-service forwarding-table rewrite-rule
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Description
Display mapping of queue number and loss priority to code point value for each rewrite rule as it exists in the forwarding table.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show class-of-service forwarding-table rewrite-ruleOutput Fields
Table 1 describes the output fields for the show class-of-service forwarding-table rewrite-rule command. Output fields are listed in the approximate order in which they appear.
Table 1: show class-of-service forwarding-table rewrite-rule Output Fields
Field Name | Field Description |
|---|---|
Rewrite table index | Index for this rewrite rule. |
# entries | Number of entries in this rewrite rule. |
Table type | Type of table: DSCP, EXP (not on the QFX Series), EXP-PUSH-3 (not on the QFX Series), EXP-SWAP-PUSH-2,(J Series routers only), IEEE 802.1,IPv4 precedence (not on the QFX Series), IPv6 DSCP, or Fixed. |
Q# | Queue number to which this entry is assigned. |
Low bits | Code point value for low-priority loss profile. |
State | State of this code point: enabled, rewritten, or disabled. |
High bits | Code point value for high-priority loss profile. |
Sample Output
show class-of-service forwarding-table rewrite-rule
user@host> show class-of-service forwarding-table
rewrite-rule Rewrite table index: 3753, # entries: 4, Table type: DSCP Q# Low bits State High bits State 0 000111 Enabled 001010 Enabled 2 000000 Disabled 001100 Enabled 1 101110 Enabled 110111 Enabled 3 110000 Enabled 111000 Enabled
