show l2-learning instance
Syntax
Release Information
(MX Series routers only) Command introduced in Junos OS Release 8.4.
Description
Display Layer 2 learning properties for all the configured routing instances.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show l2-learning instanceOutput Fields
Table 1 describes the output fields for the show l2-learning instance command. Output fields are listed in the approximate order in which they appear.
Table 1: show l2-learning instance Output Fields
Field Name | Field Description |
|---|---|
Routing Instance | Name of routing instance. |
Bridging Domain | Name of bridging domain. On MX Series routers you can use the show l2-learning instance <extensive> command option to display the Bridge Service-id information which includes the Config Service ID and the Active Service ID. |
Index | Number associated with the routing instance or bridging domain. |
Logical System | Name of logical system or Default if no logical system is configured. |
Routing instance flags | Status of Layer 2 learning properties for each routing instance:
|
MAC limit | Maximum number of MAC addresses that can be learned from each interface in the routing instance or bridging domain. |
Sample Output
show l2-learning instance
user@host> show l2-learning instanceInformation for routing instance:
Routing Instance flags (DL -disable learning, SE -stats enabled,
AD -packet action drop, LH -mac limit hit)
Routing Bridging Index Logical Routing MAC
Instance Domain System flags limit
__juniper_private1__ 1 Default 5000
vs1 vlan100 3 Default 5120
vs1 vlan200 4 Default 5120
