show ripng neighbor
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display information about RIP next-generation (RIPng) neighbors.
Options
none | — | Display information about all RIPng neighbors. |
logical-system (all | logical-system-name) | — | (Optional) Perform this operation on all logical systems or on a particular logical system. |
name | — | (Optional) Display detailed information about a specific RIPng neighbor. |
Required Privilege Level
view
List of Sample Output
show ripng neighborOutput Fields
Table 1 lists the output fields for the show ripng neighbor command. Output fields are listed in the approximate order in which they appear.
Table 1: show ripng neighbor Output Fields
Field Name | Field Description |
|---|---|
Neighbor | Name of RIPng neighbor. |
State | State of the connection: Up or Dn (Down). |
Source Address | Source address. |
Destination Address | Destination address. |
Send | Send options: broadcast, multicast, none, version 1, or yes. |
Recv | Type of packets to accept: both, none, version 1, or yes. |
In Met | Metric added to incoming routes when advertising into RIPng routes that were learned from other protocols. |
Sample Output
show ripng neighbor
user@host> show ripng neighborSource Dest In Neighbor State Address Address Send Recv Met -------- ----- ------- ------- ---- ---- --- fe-0/0/2.0 Up fe80::290:69ff:fe68:b002 ff02::9 yes yes 1
