show services service-sets cpu-usage
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Description
Display service set CPU usage as a percentage. The command is supported only on Adaptive Services PICs (SP PICs).
Options
none | — | Display CPU usage for all adaptive services interfaces and service sets. |
interface interface-name | — | (Optional) Display CPU usage for a particular interface. On M Series and T Series routers, the interface-name parameter can have the value sp-fpc/pic/port or rspnumber. On J Series routers, interface-name is sp-pim/0/port. |
service-set service-set-name | — | (Optional) Display CPU usage for a particular service set. For the Layer 2 Tunneling Protocol (L2TP), you can use a tunnel group to represent a service set. |
Required Privilege Level
view
List of Sample Output
show services service-sets cpu-usageOutput Fields
Table 1 lists the output fields for the show services service-sets cpu-usage command. Output fields are listed in the approximate order in which they appear.
Table 1: show services service-sets cpu-usage Output Fields
Field Name | Field Description |
|---|---|
Interface | Name of an adaptive services interface |
Service set (system category) | Name of the CPU usage category:
|
CPU utilization % | Percentage of the CPU resources being used |
Sample Output
show services service-sets cpu-usage
user@host> show services service-sets cpu-usage Interface Service set (system category) CPU utilization % sp-4/1/0 idp_recommended 18.20 % sp-4/1/0 Idle 44.69 % sp-4/1/0 System 7.01 % sp-4/1/0 Receive 15.10 % sp-4/1/0 Transmit 15.00 %
