Supported Platforms
show system auto-snapshot
Syntax
Release Information
Command introduced in Junos OS Release 12.3 for EX Series switches.
Description
Display automatic snapshot status information. When the automatic snapshot feature is enabled and the system reboots from the alternate root partition, the switch automatically takes a snapshot of the root file system in the alternate root partition and copies it onto the primary root partition. This automatic snapshot procedure takes place whenever the system reboots from the alternate partition, regardless of whether the reboot from the alternate partition is due to a command or due to a corruption of the primary partition.
When the automatic snapshot procedure is in progress, you cannot run the manual snapshot command, request system snapshot.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show system auto-snapshotOutput Fields
Table 1 describes the output fields for the show system auto-snapshot command. Output fields are listed in the approximate order in which they appear.
Table 1: show system auto-snapshot status Output Fields
Field Name | Field Description |
|---|---|
Auto-snapshot configuration | Status of the configuration:
|
Auto-snapshot state | Status of the automatic snapshot procedure:
|
Sample Output
show system auto-snapshot
user@switch> show system auto-snapshot
Auto-snapshot Configuration: Enabled
Auto-snapshot State: Disabled
