Supported Platforms
sshcfg
Syntax
sshcfg -T system:mm[x] <-cstatus (enabled | disabled)> <-hk (rsd | dsa | gen)> <-v1 (on | off)>
Release Information
Command supported by Junos OS Release 9.1 and later.
Description
(JCS1200 platform only) Display or configure SSH access on the JCS management module.
Options
-T system:mm[x]—Specify the JCS management module as the target of the command. Replace x with a value of 1 or 2.
-cstatus (enabled | disabled)—(Optional) Enable or disable the SSH server on the JCS management module.
-hk gen—(Optional) Generate a host key for the JCS management module.
-hk (rsa | dsa)—(Optional) Display RSA or DSA host key information for the JCS management module.
-v1 (on | off)—(Optional) Enable or disable SSH v1 on the JCS management module. (SSH v2 is always enabled.)
Required Privilege Level
operator (display)
supervisor (display or configure)
List of Sample Output
sshcfg (Display)sshcfg (Configure)
Output Fields
Table 1 lists the output fields for the sshcfg command. Output fields are listed in the approximate order in which they appear.
Table 1: sshcfg Output Fields
Field Name | Field Description |
|---|---|
v1 | SSH v1 status (On or Off). SSH v2 is always enabled (On). |
cstatus | Status of the CLI SSH server (enabled or disabled). |
CLI SSH port | Port number assigned to the CLI SSH server. |
sstatus | Status of the SMASH (secure mashup) SSH server (enabled or disabled). |
SMASH SSH port | Port number assigned to the SMASH SSH server. |
ssh-dss | DSS fingerprint for the SSH server. This fingerprint is used to verify the authenticity of the server. |
ssh-rsa | RSA fingerprint for the SSH server. This fingerprint is used to verify the authenticity of the server. |
x SSH public keys | Number of SSH public keys installed. |
x Locations | Number of locations available to store SSH public keys. |
Sample Output
sshcfg (Display)
system> sshcfg -T system:mm[1]-v1 off -cstatus enabled CLI SSH port 22 -sstatus disabled SMASH SSH port 50024 ssh-dss 2048 bit fingerprint: 27:ee:bd:a9:27:28:d8:a5:93:03:3d:8e:77:d0:38:2c ssh-rsa 2048 bit fingerprint: 66:c9:73:4f:18:11:02:10:f3:05:6e:d7:27:05:a5:01 2 SSH public keys installed 10 locations available to store SSH public keys
sshcfg (Configure)
system> sshcfg -T system:mm[1] -hk gen -cstatus
enabledOK
