Supported Platforms
test aaa dhcp user
Syntax
Release Information
Command introduced in Junos OS Release 11.2.
Option terminate-code introduced in Junos OS Release 11.4.
Description
Verify Dynamic Host Configuration Protocol (DHCP) subscriber access authentication, accounting, and address allocation configuration.
Options
username | — | Subscriber username to test. |
agent-remote-id ari | — | (Optional) Value of the DSL Forum Agent-Remote-Id (VSA 26–2). |
logical-system logical-system-name | — | (Optional) Logical system in which the subscriber is authenticated. |
mac-address mac-address | — | (Optional) MAC address of the DHCP client. |
option-82 option-82 | — | (Optional) DHCP relay agent information option (option-82) value. |
password password | — | (Optional) Password associated with the username. |
profile access-profile-name | — | (Optional) Access profile associated with the subscriber. |
routing-instance routing-instance-name | — | (Optional) Routing instance in which the subscriber is authenticated. |
source-address source-address | — | (Optional) IP address of the outgoing interface. |
terminate-code code-value | — | (Optional) Code associated with the subscriber termination. |
Required Privilege Level
view
List of Sample Output
test aaa dhcp userOutput Fields
When you enter this command, you are provided feedback on the status of your request. For information about output fields related to authentication, accounting, and subscriber-specific information, see the show network-access aaa statistics, show network-access aaa statistics authentication, show network-access aaa subscribers, and show subscribers commands.
The test command does not support volume-time accounting. If volume-time accounting is configured for the test subscriber, the test command replaces the statistics with time-only accounting statistics.
Sample Output
test aaa dhcp user
The following example tests the configuration for DHCP subscriber esmeralda and password rch4Astar, and displays the resulting output:
user@host> test aaa dhcp user esmeralda password
rch4Astar Authentication Grant
************Attributes***********
User Name - esmeralda
Client IP Address - 192.168.1.2
Client IP Netmask - 255.255.0.0
Reply Message NULL
Primary DNS IP Address - 0.0.0.0
Secondary DNS IP Address - 0.0.0.0
Primary WINS IP Address - 0.0.0.0
Secondary WINS IP Address - 0.0.0.0
Framed Pool - addr_pool5
Session Timeout - 0
Idle Timeout - 0
Service Type - 0
DHCP Guided Relay Server - 0
Client Ipv6 Address - ::
Client Ipv6 Mask - null
Framed Ipv6 Prefix - ::/0
Framed Ipv6 Pool - not-set
Nas Ipv6 Address - ::
NDRA Ipv6 Prefix - not-set
Login Ipv6 Host - ::
Framed Interface Id: - 0:0:0:0
Delegated Ipv6 Prefix - ::/0
Delegated Ipv6 Pool - not-set
User Password - testpw
NAS Ip Address - 0.0.0.0
NAS Port - 0
NAS Port Type - 5
Dhcp Mac Address - AB:CD:00:00:00:01
Dhcp GI Address - 192.168.2.254
Client Session Activate request sent
Client Session Activated
Filter Id - not set
Framed MTU - (null)
Framed Route - not set
IGMP - disabled
Redirect VR Name - default
Service Bundle - Null
Ingress Policy Name - not set
Egress Policy Name - not set
Framed Ip Route Tag - not set
LI Action - 0
LI Intercpet Id - 0
Med Ipaddress - 0.0.0.0
Med Port Number - 0
Ignore DF Bit - disabled
IGMP Access Group Name - not set
IGMP Access Source Group Name - not set
MLD Access Group Name - not set
MLD Access Source Group Name - not set
IGMP Version - IGMP Version not set
MLD Version - MLD Version not set
IGMP Immediate Leave - disabled
MLD Immediate Leave - disabled
IPv6 Ingress Policy Name - not set
IPv6 Egress Policy Name - not set
Cos Parameter Type - not set
Cos Scheduler Parameter Type - not set
Acct Session ID- 9
Acct Interim Interval - 0
Acct Type - 0
Ingress Statistics disabled
Egress Statistics disabled
****Pausing 10 seconds before disconnecting the test user*********
Logging out subscriber
Terminate Id - dhcp nak
Test complete. Exiting
