Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

Supported Platforms

 
 

volts

Syntax

volts -T target

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS1200 platform only) Show voltage information for components in the JCS chassis. This information is useful for viewing current voltage values and voltage threshold settings.

Options

-T target—Specify the target of the volts command. Valid targets for this command are:

  • system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
  • system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
  • system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

Required Privilege Level

operator (display)

 
 

List of Sample Output

volts (JCS Management Module)
volts (Routing Engine)

Output Fields

Table 1 lists the output fields for the volts command. Output fields are listed in the approximate order in which they appear.

Table 1: volts Output Fields

Field Name

Field Description

Source

Total voltage available from the voltage source.

Value

Current voltage of the component.

Warning

Voltage at which a warning message occurs.

Reset

Voltage at which the component will reset.

Hysteresis

The amount the voltage must decrease below the Warning threshold before the warning is cleared.

Sample Output

volts (JCS Management Module)

system> volts -T system:mm[1]
Source     Value     Warning           Reset             Hysteresis
+5v        +4.84		 (+4.50,+5.25)     (+4.85,+5.15)     (+0.35,+0.10)
+3.3v      +3.26		 (+3.00,+3.47)     (+3.20,+3.40)     (+0.20,+0.07)
+12v       +12.03		 (+10.80,+12.60)   (+11.64,+12.36)   (+0.84,+0.24)
–5v        —4.90		 (-5.50,–4.75)     (-5.15,-4.85)     (+0.35,+0.10)
+2.5v      +2.48		 (+2.25,+2.63)     (+2.42,+2.58)     (+0.17,+0.05)
+1.8v      +1.76		 (+1.62,+1.89)     (+1.74,+1.86)     (+0.12,+0.03)

Sample Output

volts (Routing Engine)

system> volts -T system:blade[5]
Source           Value     Warning 
1.8 V Sense      +1.79     (+1.61,+1.97) 
1.8VSB Sense     +1.83     (+1.61,+1.97)
12V Sense        +12.33    (+10.79,+13.21) 
12VSB Sense      +12.30    (+10.74,+13.19)
3.3V Sense       +3.31     (+2.96,+3.62)
5V Sense         +5.06     (+4.39,+5.48)       
 

Published: 2013-02-12

Supported Platforms

 
 

Published: 2013-02-12