fru-poweron-sequence
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.0.
Statement introduced in Junos OS Release 12.1 for PTX Series packet transport switches.
Statement introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Statement introduced in Junos OS Release 12.3 for T640, T1600, and T4000 routers.
Description
(MX Series 3D Universal Edge Routers only) Configure the power-on sequence for the DPCs in the chassis for routers with the enhanced AC Power Entry Module (PEM).
(T640 routers, T1600 routers, T4000 routers, MX2020 routers, and PTX Series packet transport switches) Configure the power-on sequence for Flexible PIC Concentrators (FPCs) installed in the chassis.
Options
(MX Series 3D Universal Edge Routers only) fru-poweron-sequence—Power-on sequence for the DPCs in the chassis. The numbers indicate the slot number of the DPCs.
 | Note: If the power-on sequence is not configured by including the fru-poweron-sequence statement, Junos OS uses the /var/log/poweron_seq.log file to determine the power-on sequence for the last power-on operation for the DPCs and the same sequence is used. If the /var/log/boot_seq.log file, is not available, Junos OS uses the ascending order of the slot numbers of the DPCs as the sequence to power on the DPCs. |
(T640 routers, T1600 routers, T4000 routers, MX2020 routers, and PTX Series packet transport switches) fru-poweron-sequence—Power-on sequence for the FPCs in the chassis. The numbers indicate the slot number of the FPCs.
|
|
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
