Supported Platforms
trunk-bandwidth
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For ATM2 IQ interfaces configured to use Layer 2 circuit trunk mode, configure a scheduler so that unused bandwidth from any inactive trunk is proportionally shared among the active trunks.
During congestion, each trunk receives a proportional share of the leftover bandwidth, thus minimizing the latency on each trunk.
Options
rate—Peak rate, in bits per second (bps) or cells per second (cps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000). You can also specify a value in cells per second by entering a decimal number followed by the abbreviation c; values expressed in cells per second are converted to bits per second by means of the formula 1 cps = 384 bps.
Range: 1,000,000 through 542,526,792 bps
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
