Navigation
Supported Platforms
Related Documentation
- J Series
- Configuring Logical Interface Properties
- MX Series
- Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX Series Routers
- Additional Information
- Junos Services Interfaces Configuration Release 12.3
unit
Syntax
unit logical-unit-number {accept-source-mac {mac-address mac-address {policer {input cos-policer-name;output cos-policer-name;}}}accounting-profile name;advisory-options {downstream-rate rate;upstream-rate rate;}allow-any-vci;atm-scheduler-map (map-name | default);backup-options {interface interface-name;}bandwidth rate;cell-bundle-size cells;clear-dont-fragment-bit;compression {rtp {maximum-contexts number <force>;f-max-period number;queues [ queue-numbers ];port {minimum port-number;maximum port-number;}}}compression-device interface-name;copy-tos-to-outer-ip-header;demux-destination family;demux-source family;demux-options {underlying-interface interface-name;}description text;interface {l2tp-interface-id name;(dedicated | shared);}dialer-options {activation-delay seconds;callback;callback-wait-period time;deactivation-delay seconds;dial-string [ dial-string-numbers ];idle-timeout seconds;incoming-map {caller caller-id) | accept-all;initial-route-check seconds;load-interval seconds;load-threshold percent;pool pool-name;redial-delay time;watch-list {[ routes ];}}}disable;disable-mlppp-inner-ppp-pfc;dlci dlci-identifier;drop-timeout milliseconds;dynamic-call-admission-control {activation-priority priority;bearer-bandwidth-limit kilobits-per-second;}encapsulation type;epd-threshold cells plp1 cells;family family-name {... the family subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number] hierarchy ...}fragment-threshold bytes;inner-vlan-id-range start start-id end end-id;input-vlan-map {(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);inner-tag-protocol-id tpid;inner-vlan-id number;tag-protocol-id tpid;vlan-id number;}interleave-fragments;inverse-arp;layer2-policer {input-policer policer-name;input-three-color policer-name;output-policer policer-name;output-three-color policer-name;}link-layer-overhead percent;minimum-links number;mrru bytes;multicast-dlci dlci-identifier;multicast-vci vpi-identifier.vci-identifier;multilink-max-classes number;multipoint;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);output-vlan-map {(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);inner-tag-protocol-id tpid;inner-vlan-id number;tag-protocol-id tpid;vlan-id number;}passive-monitor-mode;peer-unit unit-number;plp-to-clp;point-to-point;ppp-options {chap {access-profile name;default-chap-secret name;local-name name;passive;}compression {acfc;pfc;}dynamic-profile profile-name;lcp-restart-timer milliseconds;loopback-clear-timer seconds;ncp-restart-timer milliseconds;pap {access-profile name;default-pap-password password;local-name name;local-password password;passive;}}pppoe-options {access-concentrator name;auto-reconnect seconds;(client | server);service-name name;underlying-interface interface-name;}pppoe-underlying-options {access-concentrator name;dynamic-profile profile-name;max-sessions number;}proxy-arp;service-domain (inside | outside);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}short-sequence;targeted-distribution;transmit-weight number;(traps | no-traps);trunk-bandwidth rate;trunk-id number;tunnel {backup-destination address;destination address;key number;routing-instance {destination routing-instance-name;}source source-address;ttl number;}vci vpi-identifier.vci-identifier;vci-range start start-vci end end-vci;vpi vpi-identifier;vlan-id number;vlan-id-range number-number;vlan-tags inner tpid.vlan-id outer tpid.vlan-id;family family {accounting {destination-class-usage;source-class-usage {(input | output | input output);}}access-concentrator name;address address {... the address subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number family family-name] hierarchy ...}bridge-domain-type (bvlan | svlan);bundle interface-name;core-facing;demux-destination {destination-prefix;}demux-source {source-prefix;}duplicate-protection;dynamic-profile profile-name;filter {group filter-group-number;input filter-name;input-list [ filter-names ];output filter-name;output-list [ filter-names ];}interface-mode (access | trunk);ipsec-sa sa-name;isid-list all-service-groups;keep-address-and-control;mac-validate (loose | strict);max-sessions number;mtu bytes;multicast-only;no-redirects;policer {arp policer-template-name;input policer-template-name;output policer-template-name;}primary;protocols [inet iso mpls];proxy inet-address address;receive-options-packets;receive-ttl-exceeded;remote (inet-address address | mac-address address);rpf-check {fail-filter filter-namemode loose;}sampling {input;output;}service {input {post-service-filter filter-name;service-set service-set-name <service-filter filter-name>;}output {service-set service-set-name <service-filter filter-name>;}}service-name-table table-name(translate-discard-eligible | no-translate-discard-eligible);(translate-fecn-and-becn | no-translate-fecn-and-becn);translate-plp-control-word-de;unnumbered-address interface-name destination address destination-profile profile-name;vlan-id number;vlan-id-list [number number-number];address address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;destination address;destination-profile name;eui-64;master-only;multipoint-destination address {dlci dlci-identifier;epd-threshold cells <plp1 cells>;inverse-arp;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);shaping {(cbr rate | rtvbr burst length peak rate sustained rate | vbr burst length peak rate sustained rate);queue-length number;}vci vpi-identifier.vci-identifier;}preferred;primary;(vrrp-group | vrrp-inet6-group) group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-type authentication;authentication-key key;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bits-per-second priority-cost number;}priority-hold-time seconds;route ip-address/prefix-length routing-instance instance-name priority-cost cost;}virtual-address [ addresses ];virtual-link-local-address ipv6–address;vrrp-inherit-from {active-interface interface-name;active-group group-number;}}}}}
Hierarchy Level
[edit interfaces interface-name],[edit logical-systems logical-system-name interfaces interface-name],[edit interfaces interface-set interface-set-name interface interface-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Configure a logical interface on the physical device. You must configure a logical interface to be able to use the physical device.
Options
logical-unit-number—Number of the logical unit.
Range: 0 through 1,073,741,823 for demux and PPPoE static interfaces only. 0 through 16,385 for all other static interface types.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- J Series
- Configuring Logical Interface Properties
- MX Series
- Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX Series Routers
- Additional Information
- Junos Services Interfaces Configuration Release 12.3
Published: 2013-02-18
Supported Platforms
Related Documentation
- J Series
- Configuring Logical Interface Properties
- MX Series
- Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX Series Routers
- Additional Information
- Junos Services Interfaces Configuration Release 12.3