Common Interface Commands
Table 1 summarizes common clear interfaces and show interfaces commands used to monitor and troubleshoot most interface types. Commands are listed in alphabetical order.
Table 1: Common Interface Commands
Task | Command |
|---|---|
Clear the channel service unit (CSU) alarm and defect counters. | |
Clear interface statistics to zero. | |
Display brief information about all configured interfaces. | |
Display interface descriptions. | |
Display interfaces grouped by destination class. | |
Display detailed information about all configured interfaces. | |
Display extensive information about all configured interfaces. | |
Display all firewall filters that are installed on each interface. | |
Display CSU interface alarm and error counts for the past 24 hours. | |
Display media-specific information about all configured network interfaces. | |
Display all firewall policers that are installed on each interface. | |
Display class-of-service (CoS) information per physical interface. | |
Display the routing protocol process view of the router's interfaces status. | |
Display a summary of the routing protocol process view of the router’s interfaces status. | |
Display information about the SNMP index of an interface. | |
Display information about interfaces grouped by source class. | |
Display static interface statistics, such as errors. | |
Display summary information about interfaces. |
 | Note: For information about the monitor interface and monitor traffic commands, see the Junos System Basics and Services Command Reference. For information about the show interfaces controller command, see the channelized interfaces chapters in this reference. |
