Navigation
Supported Platforms
Related Documentation
Configuring the Transport Logical Interface for a Pseudowire Subscriber Logical Interface
This topic describes how to configure a pseudowire transport logical interface. A pseudowire device can have only one transport logical interface.
A pseudowire logical device and its related pseudowire logical interfaces are dependent on the state of the underlying logical transport interface device, which is either the Layer 2 VPN or Layer 2 circuit.
 | Note: We recommend that you use unit 0 to represent the transport logical interface for the pseudowire device. Non-zero unit numbers represent service logical interfaces used for pseudowire subscriber interfaces. |
To configure a pseudowire transport logical interface:
- Specify that you want to configure the pseudowire subscriber
logical interface device.[edit]user@host# edit interfaces ps0
- Specify that you want to configure unit 0, which represents
the transport logical interface. [edit interfaces ps0]user@host# edit unit 0
- Specify the ethernet-ccc encapsulation method
for the transport logical interface.[edit interfaces ps0 unit 0]user@host# set encapsulation ethernet-ccc
