Supported Platforms
Configuring the Minimum Adjusted Shaping Rate on Scheduler Nodes for Subscribers
Overview
Absolute adjustments and delta adjustments are performed at the scheduler node level. You can configure a minimum adjusted shaping rate at the scheduler node level using static or dynamic CoS parameters.
This feature is supported for adjustments performed by the ANCP and multicast applications on both EQ DPCs and MPC/MIC modules on MX Series routers.
 | Best Practice: For multicast traffic, you can configure a minimum adjusted shaping rate at the queue level. We recommend that you configure the minimum adjusted value at the scheduler node or the queue, but not both. When you configure a minimum adjusted value for a node and for a scheduler that is referenced by a scheduler map in the same traffic-control-profile, the system uses the minimum value from the scheduler. |
This feature is supported for adjustments performed by the ANCP and multicast applications on both EQ DPCs and MPC/MIC modules on MX Series routers.
Configuring a Static Minimum Adjusted Shaping Rate on Scheduler Nodes
To apply a minimum adjusted shaping rate for a scheduler node:
- Configure the adjust-minimum statement for the
static traffic-control profile.[edit class-of-service traffic-control-profiles profile-name]user@host# set adjust-minimum rate
Configuring a Dynamic Minimum Adjusted Shaping Rate on Scheduler Nodes
To apply a minimum adjusted shaping rate for a scheduler node:
- Configure the adjust-minimum statement for the
dynamic traffic-control profile.[edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name]user@host# set adjust-minimum rate
