Supported Platforms
Configuring the ATM-over-ADSL Physical Interface Operating Mode
Configure the ADSL operating mode on the physical ATM interface by including the operating-mode statement at the [edit interfaces at-pim/0/port dsl-options] hierarchy level:
By default, the mode is auto, which means the ADSL line autonegotiates the setting to match the setting of the DSLAM located at the central office.
Table 1 shows the Annex A PIM and Annex B PIM operational modes for ATM-over-ADSL interfaces.
Table 1: ATM-over-ADSL Operational Modes
Encapsulation Types | Comments |
|---|---|
| Annex A PIMs | |
adsl2plus | Set the ADSL line to train in the ITU G.992.5 mode. |
ansi-dmt | Set the ADSL line to train in the ANSI T1.413 Issue 2 mode. |
auto | Set the ADSL line to autonegotiate the setting to match the setting of the DSLAM located at the central office. The ADSL line trains in the ANSI T1.413 Issue 2 (ansi-dmt) or ITU G.992.1 (itu-dmt) mode. |
itu-dmt | Set the ADSL line to train in the ITU G.992.1 mode. |
itu-dmt-bis | Set the ADSL line to train in the ITU G.992.3 mode. |
itu-lite | Set the ADSL line to train in the G.992.2 mode. |
itu-lite-bis | Set the ADSL line to train in the G.992.4 mode. |
| Annex B PIMs | |
adsl2plus | Set the ADSL line to train in the ITU G.992.5 mode. |
auto | Set the ADSL line after autonegotiating the setting to match the setting of the DSLAM located at the central office. |
etsi | Set the ADSL line to train in the ETSI TS 101 388 V1.3.1 mode. |
itu-dmt | Set the ADSL line to train in the ITU G.992.1 mode. |
itu-dmt-bis | Set the ADSL line to train in the ITU G.992.3 mode. |
itu-annexb-ur2 | Set the ADSL line to train in the ITU G.992.1 Deutsche Telekom UR-2 mode. |
itu-annexb-non-ur2 | Set the ADSL line to train in the ITU G.992.1 non-UR-2 mode. |
itu-dmt | Set the ADSL line to train in the ITU G.992.1 mode. |
