Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
 

Related Documentation

 

Removing the Outer VLAN Tag and Rewriting the Inner VLAN Tag

On Ethernet IQ, IQ2 and IQ2-E interfaces, on MX Series router Gigabit Ethernet, Tri-Rate Ethernet copper, and 10-Gigabit Ethernet interfaces, and on aggregated Ethernet interfaces using Gigabit Ethernet IQ2 and IQ2-E or 10-Gigabit Ethernet PICs on MX Series routers, to remove the outer VLAN tag of the frame and replace the inner VLAN tag of the frame with a user-specified VLAN tag value, include the pop-swap statement in the input VLAN map or output VLAN map:

The inner tag becomes the outer tag in the final frame.

You can include this statement at the following hierarchy levels:

See Configuring Inner and Outer TPIDs and VLAN IDs and Configuring Inner and Outer TPIDs and VLAN IDs for information about configuring inner and outer VLAN ID values and inner and outer TPID values required for VLAN maps.

 

Related Documentation

 

Published: 2013-02-13

Supported Platforms

 

Related Documentation

 

Published: 2013-02-13