Navigation
Example: Configuring a Channelized T1 Interface as Primary Rate Interface
Configure a channelized T1 interface to operate fully as a PRI:
[edit interfaces]
ct1-2/0/0 {partition 1-23 timeslots 1-23 interface-type bc;partition 24 timeslots 24 interface-type dc;t1-options {line-encoding b8zs;framing esf;}traceoptions {flag q931;flag q921;file {pri_trace_log;}}dialer-options {pool 1 priority 25;}isdn-options {switch-type att5e;bchannel-allocation descending;incoming-called-number 384101;incoming-called-number 384102;incoming-called-number 384103;}}
[edit interfaces]
dl0 {unit 0 {dialer-options {pool 1;dial-string 384010;incoming-map {accept-all;}}family inet {filter {dialer int-packet;}address 13.1.1.2/24;}}}
[edit firewall]family inet {dialer-filter int-packet {term term1 {from {destination address {13.1.1.1/24;}protocol icmp;then note;}}term term2 {then ignore;}}}
