Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

ifconfig (JCS Management Module)

Syntax

ifconfig -T system:mm[x] (-eth0 | -eth1) <enabled | disabled> <-c static> <-g gateway-address> <-i static-ip-address> <-s subnet-mask>

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS management module CLI) Configure or display the JCS management module Ethernet interface.

Options

-T system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2). The JCS management module is the only valid target available for this command.

-eth0 | -eth1—Specify Ethernet channel 0 or Ethernet channel 1.

enabled | disabled—(Optional) Enable or disable the Ethernet interface on the JCS management module.

-c static—(Optional) Specify static IP configuration.

-g gateway-address—(Optional) Gateway IP address of the Ethernet interface on the JCS management module.

-i static-ip-address—(Optional) Static IP address of the Ethernet interface on the JCS management module.

-s subnet-mask—(Optional) Subnet mask of the Ethernet interface on the JCS management module.

Required Privilege Level

operator (display)

supervisor (display or configure)

List of Sample Output

ifconfig (Display)
ifconfig (Configure)

Output Fields

Table 1 lists the output fields for the ifconfig command. Output fields are listed in the approximate order in which they appear.

Table 1: ifconfig Output Fields

Field Name

Field Description

-i

IP address of the Ethernet interface on the JCS management module.

-g

Gateway IP address of the Ethernet interface on the JCS management module.

-s

Subnet mask of the Ethernet interface on the JCS management module.

-c

Configuration method (static) for the Ethernet interface on the JCS management module.

Sample Output

ifconfig (Display)

system> ifconfig -T system:mm[1] -eth0
Enabled
-i 192.168.171.96 
-g 192.168.171.254
—s 255.255.252.0
-c static

ifconfig (Configure)

system> ifconfig -T system:mm[1] —eth0 -c static —i 157.210.171.96 -g 157.210.171.254 —s 255.255.252.0
OK

Published: 2013-07-16

Supported Platforms

Published: 2013-07-16