Supported Platforms
show analytics configuration
Syntax
Release Information
Command introduced in Junos OS Release 13.2 for the QFX Series.
Description
Show the network analytics configuration details for the global and interface configurations.
Required Privilege Level
interface-control
List of Sample Output
show analytics configuration (Junos OS Release 13.2X51-D15 and Later)show analytics configuration (Junos OS Release 13.2X51-D10 and Earlier)
Output Fields
describes the output fields for the show analytics configuration command in Junos OS Release 13.2X51-D15 and later.
Table 1: show analytics configuration Command Output Fields (Junos OS Release 13.2X51-D15 and Later)
Field | Descriptions |
|---|---|
| Global Configurations | |
Traffic monitoring status | Settings are enabled or disabled. If traffic statistics monitoring is not enabled, this field is not shown. |
Traffic monitoring polling interval | Interval for traffic statistics polling in seconds. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue monitoring status | Settings are enabled or disabled. If queue statistics monitoring is not enabled, this field is not shown. |
Queue monitoring polling interval | Interval for queue statistics polling in milliseconds. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue depth high threshold | Upper limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, this field is not shown. |
Queue depth low threshold | Lower limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, this field is not shown. |
Queue latency high threshold | Upper limit of the latency threshold configuration in nanoeconds. If the queue latency threshold is not configured, this field is not shown. |
Queue latency low threshold | Lower limit of the latency threshold configuration in microseconds. If the queue latency threshold is not configured, this field is not shown. |
| Interface Configurations | |
Interface | Name of interface that is configured for network analytics. The interface configuration overrides the global network analytics configuration. |
Traffic Statistics | Settings are Enabled or Disabled for the interface. |
Queue Statistics | Settings are Enabled or Disabled for the interface. |
Queue depth threshold High | Upper limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, n/a is displayed. |
Queue depth threshold Low | Lower limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, n/a is displayed. |
Latency threshold High | Upper limit of the latency threshold configuration in nanoseconds. If the latency threshold is not configured, n/a is displayed. |
Latency threshold Low | Lower limit of the latency threshold configuration in nanoseconds. If the latency threshold is not configured, n/a is displayed. |
Table 2 describes the output fields for the show analytics configuration command in Junos OS Release 13.2X51-D10 and 13.2X50-D15.
Table 2: show analytics configuration Command Output Fields (Junos OS Release 13.2X51-D10 and earlier)
Field | Descriptions |
|---|---|
| Global Configurations | |
Traffic statistics | Settings are Auto, Enabled, or Disabled. If Auto is displayed, traffic statistics monitoring is not enabled. |
Poll interval (traffic statististics) | Interval for traffic statistics polling in seconds. If the output displays a setting of 0 seconds, the polling interval was not configured, and the default interval applies. Note: The default interval is 1 second in Junos OS Release 13.2X50-D15, and 2 seconds in Junos OS Release 13.2X51-D10. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue statistics | Settings are Auto, Enabled, or Disabled. If Auto is displayed, queue statistics monitoring is not enabled. |
Poll interval (queue statististics) | Interval for queue statistics polling in milliseconds. Note: The default interval is 8 milliseconds in Junos OS Release 13.2X50-D15, and 10 milliseconds in Junos OS Release 13.2X51-D10 or later. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Depth threshold high | Upper limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Depth threshold low | Lower limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Latency threshold high | Upper limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Latency threshold low | Lower limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
| Interface Configurations | |
Interface | Name of interface that is configured for network analytics. The interface configuration overrides the global network analytics configuration. |
Traffic Statistics | Settings are Enabled or Disabled for the interface. |
Queue Statistics | Settings are Enabled or Disabled for the interface. |
Depth-threshold High | Upper limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Depth-threshold Low | Lower limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Latency-threshold High | Upper limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Latency-threshold Low | Lower limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Sample Output
show analytics configuration (Junos OS Release 13.2X51-D15 and Later)
user@host> show analytics configuration
Traffic monitoring status is enabled Traffic monitoring polling interval : 5 seconds Queue monitoring status is enabled Queue monitoring polling interval : 1000 milliseconds Queue depth high threshold : 99999 bytes Queue depth low threshold : 99 bytes Interface Traffic Queue Queue depth Latency Statistics Statistics threshold threshold High Low High Low (bytes) (nanoseconds) xe-0/0/16 enabled enabled n/a n/a 2300 20 xe-0/0/18 enabled enabled n/a n/a 2300 20 xe-0/0/19 enabled enabled n/a n/a 2300 20
show analytics configuration (Junos OS Release 13.2X51-D10 and Earlier)
user@host> show analytics configuration
Global configurations: Traffic statistics: Enabled, Poll interval: 2 seconds Queue statistics: Auto, Poll interval: 10 milliseconds Depth threshold high: 0 bytes, low: 0 bytes Latency threshold high: 0 microseconds, low: 0 microseconds Interface Traffic Queue Depth-threshold Latency-threshold Statistics Statistics High Low High Low (bytes) (microseconds) xe-0/0/0 Auto Auto 204800 10 0 0
