show pppoe version
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Description
(J Series Services Routers, M120 routers, and M320 routers only) Display version information about PPPoE.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show pppoe versionOutput Fields
Table 1 lists the output fields for the show pppoe version command. Output fields are listed in the approximate order in which they appear.
Table 1: show pppoe version Output Fields
Field Name | Field Description |
|---|---|
version n | PPPoE version number and RFC. For example, version 1, rfc 2516. |
PPPoE protocol | State of the PPPoE protocol: enabled or disabled. |
Maximum Sessions | Maximum active sessions supported per router. The default is 256 sessions. |
PADI resend timeout | Initial time, in seconds, that the router waits to receive a PPoE Active Discovery Offer (PADO) packet for the PPoE Active Discovery Initiation (PADI) packet sent. This timeout doubles for each successive PADI packet sent. Not displayed for M120 and M320 routers. |
PADR resend timeout | Initial time, in seconds, that the router waits to receive a PPoE Active Discovery Session Confirmation (PADS) packet for the PPoE Active Discovery Request (PADR) packet sent. This timeout doubles for each successive PADR packet sent. Not displayed for M120 and M320 routers. |
Max resend timeout | Maximum value, in seconds, that the PADI or PADR resend timer can accept. The maximum value is 64. Not displayed for M120 and M320 routers. |
Max Configured AC timeout | Time, in seconds, during which the configured access concentrator must respond. Not displayed for M120 and M320 routers. |
Sample Output
show pppoe version
user@host> show pppoe version Point-to-Point Protocol Over Ethernet, version 1. rfc2516 PPPoE protocol = Enabled Maximum Sessions = 256 PADI resend timeout = 2 seconds PADR resend timeout = 16 seconds Max resend timeout = 64 seconds Max Configured AC timeout = 4 seconds
