show services subscriber bandwidth
Syntax
Release Information
Command introduced in Junos OS Release 10.2.
Description
Display bandwidth information about subscribers with the specified criteria. The bandwidth is computed at fixed intervals on the MS-DPC and only the last interval is used for comparison.
Options
client-id client-id | — | (Optional) Displays bandwidth information for the subscriber with this client ID. The client ID is a generated identifier assigned to each packet-triggered subscriber known to the router. |
interface interface-name | — | (Optional) Displays bandwidth information for the subscriber with this underlying interface name. |
ip-address ip-address | — | (Optional) Displays bandwidth information for the subscriber with this IPv4 address. |
service-interface interface-name | — | (Optional) Displays bandwidth information for the subscriber with this service interface name. |
top-talkers number-top-talkers | — | (Optional) Displays bandwidth information for the specified number of subscribers using the most bandwidth based on the input-bps or output-bps values for the interface or service interface. |
Required Privilege Level
view
List of Sample Output
show services subscriber bandwidth client-idOutput Fields
Table 1 lists the output fields for the show services subscriber bandwidth command. Output fields are listed in the approximate order in which they appear.
Table 1: show services subscriber bandwidth Output Fields
Field Name | Field Description |
|---|---|
client-id | Client identifier. |
input-bps | Ingress bandwidth in bytes per second. |
output-bps | Egress bandwidth in bytes per second. |
input-pps | Ingress bandwidth in packets per second. |
output-pps | Egress bandwidth in packets per second. |
Sample Output
show services subscriber bandwidth client-id
user@host> show services subscriber bandwidth
client-id 1client-id input-bps output-bps input-pps output-pps 1 20 20 1000 1000
