Navigation
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Firewall Filter Match Conditions and Actions
- Configuring Firewall Filters
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Firewall Filters
firewall
Syntax
firewall {family family-name {filter filter-name {interface-specific;term term-name {from {match-conditions;}then {action;action-modifiers;}}}}policer policer-name {filter-specific;if-exceeding {bandwidth-limit bps;burst-size-limit bytes;}then {policer-action;}}three-color-policer policer-name {action {loss-priority high then discard;}single-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;excess-burst-size bytes;}two-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;peak-information-rate bps;peak-burst-size bytes;}}}
Hierarchy Level
[edit]
Release Information
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description
Configure firewall filters and policers.
The remaining statements are explained separately.
Required Privilege Level
firewall—To view this statement in the
configuration.
firewall-control—To add this statement
to the configuration.
Related Documentation
- QFabric System, QFX Series standalone switches
- Firewall Filter Match Conditions and Actions
- Configuring Firewall Filters
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Firewall Filters
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Firewall Filter Match Conditions and Actions
- Configuring Firewall Filters
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Firewall Filters
