Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Policers
peak-information-rate
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description
Configure the maximum achievable rate. Packets that exceed the committed information rate (CIR) but are below the peak information rate (PIR) are marked with medium-high packet loss priority (yellow). Packets that exceed the PIR are marked with high packet loss priority (red). You can configure a discard action for packets that exceed the PIR.
 | Note: When you include the peak-information-rate statement in the configuration, you must also include the committed-information-rate and peak-burst-size statements at the same hierarchy level. |
Options
bits-per-second—Number of bits per second. You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Range: 32,000 bps through 10,000,000,000 bps (10 gbps)
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Policers
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Configuring Two-Color and Three-Color Policers to Control Traffic Rates
- Overview of Policers
