Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation

interface (Dynamic Interface Sets)

Syntax

interface interface-name {unit logical unit number {advisory-options {downstream-rate rate;upstream-rate rate;}}}

Hierarchy Level

[edit dynamic-profiles profile-name interfaces interface-set interface-set-name]

Release Information

Statement introduced in Junos OS Release 12.2.

Description

Add a subscriber interface to a dynamic interface set.

In a dynamic profile that defines an agent circuit identifier (ACI) interface set, observe the following guidelines when you use the interface statement:

  • Use the predefined dynamic interface variable $junos-interface-ifd-name to represent the interface name. Do not use a specific interface name, such as demux0, when defining an ACI interface set.
  • Do not include the unit logical-unit-number statement.

Options

interface-name–Either the specific name of the interface to include in the interface set, or the predefined dynamic interface variable $junos-interface-ifd-name. The interface variable is dynamically replaced with the interface that the DHCP or PPPoE subscriber accesses when connecting to the router.

The remaining statement is explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Published: 2013-07-31