Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- show ethernet-switching interfaces
- show vlans
l3-interface (VLAN)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1 for the QFX Series.
irb option introduced in Junos OS Release 13.2 for the QFX Series.
Description
Associate a Layer 3 interface with the VLAN. Configure Layer 3 interfaces on trunk ports to allow the interface to transfer traffic between VLANs. Traffic between VLANs must be routed, which requires a common Layer 3 interface.
Default
No Layer 3 (routing) interface is associated with the VLAN.
Options
vlan.logical-interface-number—Number of the logical interface. Use the unit number that you used when you created the vlan interface with a set interfaces vlan unit statement.
 | Note: Use this statement with versions of Junos OS that do not support Enhanced Layer 2 Software (ELS). |
irb.logical-interface-number—Logical interface defined with a set interfaces irb statement.
| Note: Use this statement with versions of Junos OS that support Enhanced Layer 2 Software (ELS). |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- QFabric System, QFX Series standalone switches
- show ethernet-switching interfaces
- show vlans
Published: 2014-10-07
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- show ethernet-switching interfaces
- show vlans
