Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

label-switched-path-template

Syntax

label-switched-path-template {(default-template | lsp-template-name);}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name provider-tunnel rsvp-te],[edit logical-systems logical-system-name routing-instances routing-instance-name provider-tunnel ingress-replication label-switched-path],[edit logical-systems logical-system-name routing-instances routing-instance-name provider-tunnel selective group address source source-address rsvp-te],[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name rsvp-te entry-name],[edit routing-instances routing-instance-name provider-tunnel ingress-replication label-switched-path],[edit routing-instances routing-instance-name provider-tunnel rsvp-te],[edit routing-instances routing-instance-name provider-tunnel selective group address source source-address rsvp-te],[edit routing-options dynamic-tunnels tunnel-name rsvp-te entry-name]

Release Information

Statement introduced in Junos OS Release 8.5.

Description

Specify the LSP template. An LSP template is used as the basis for other dynamically generated LSPs. This feature can be used for a number of applications, including point-to-multipoint LSPs, flooding VPLS traffic, configuring ingress replication for IP multicast using MBGP MVPNs, and to enable RSVP automatic mesh. There is no default setting for the label-switched-path-template statement, so you must configure either the default-template using the default-template option, or you must specify the name of your preconfigured LSP template.

Options

default-template—Specify that the default LSP template be used for the dynamically generated LSPs.

lsp-template-name—Specify the name of an LSP to be used as a template for the dynamically generated LSPs.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-08-28

Previous Page Next Page