Navigation
Related Documentation
- EX, M, MX, QFX, SRX, T Series
- maximum
- M, MX, PTX, QFX, T Series
- Example: Configuring MSDP with Active Source Limits and Mesh Groups
log-interval (Protocols MSDP)
Syntax
log-interval seconds;
Hierarchy Level
[edit logical-systems logical-system-name protocols msdp active-source-limit],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols msdp active-source-limit],[edit protocols msdp active-source-limit],[edit routing-instances routing-instance-name protocols msdp active-source-limit]
Release Information
Statement introduced in Junos OS Release 12.2
Description
Specify the minimum time interval (in seconds) between sending consecutive log messages to the system log for MSDP active source messages. To configure the time interval, you must specify the maximum number of MSDP active source messages received by the device.
To confirm the configured log interval, use the show msdp source-active command.
Options
seconds—Minimum time interval (in seconds) between log messages. You must explicitly configure the maximum value to configure a time interval to send log messages.
Range: 6 through 32,767 seconds
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX, M, MX, QFX, SRX, T Series
- maximum
- M, MX, PTX, QFX, T Series
- Example: Configuring MSDP with Active Source Limits and Mesh Groups
