Navigation
Supported Platforms
msdp
Syntax
msdp {disable;active-source-limit {log-interval seconds;log-warning value;maximum number;threshold number;}data-encapsulation (disable | enable);export [ policy-names ];group group-name {... group-configuration ...}hold-time seconds;import [ policy-names ];local-address address;keep-alive seconds;peer address {... peer-configuration ...}rib-group group-name;source ip-prefix</prefix-length> {active-source-limit {maximum number;threshold number;}}sa-hold-time seconds;traceoptions {file filename <files number> <size size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}group group-name {disable;export [ policy-names ];import [ policy-names ];local-address address;mode (mesh-group | standard);peer address {... same statements as at the [edit protocols msdp peer address] hierarchy level shown just following ...}traceoptions {file filename <files number> <size size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}}peer address {disable;active-source-limit {maximum number;threshold number;}authentication-key peer-key;default-peer;export [ policy-names ];import [ policy-names ];local-address address;traceoptions {file filename <files number> <size size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}}}
Hierarchy Level
[edit logical-systems logical-system-name protocols],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols],[edit protocols],[edit routing-instances routing-instance-name protocols]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Statement introduced in Junos OS Release 12.1 for the QFX Series.
Description
Enable MSDP on the router or switch. You must also configure at least one peer for MSDP to function.
Default
MSDP is disabled on the router or switch.
Options
The statements are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
