Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Example: Setting Up Basic Bridging and a VLAN on the QFX Series
- Understanding Bridging and VLANs
- show ethernet-switching interfaces
- show vlans
members
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description
For trunk interfaces, configure the VLANs for which the interface can carry traffic.
 | Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range. |
Options
all—Specify that this trunk interface be a member of all the VLANs that are configured on this switch. When a new VLAN is configured on the switch, this trunk interface automatically becomes a member of the VLAN.
 | Note: Each VLAN that is configured must have a specified VLAN ID when you attempt to commit the configuration; otherwise, the configuration commit fails. Also, all cannot be the name of a VLAN on the switch. |
names—Names of one or more VLANs.
vlan-ids—Numeric identifiers of one or more VLANs.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- QFabric System, QFX Series standalone switches
- Example: Setting Up Basic Bridging and a VLAN on the QFX Series
- Understanding Bridging and VLANs
- show ethernet-switching interfaces
- show vlans
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFabric System, QFX Series standalone switches
- Example: Setting Up Basic Bridging and a VLAN on the QFX Series
- Understanding Bridging and VLANs
- show ethernet-switching interfaces
- show vlans
