Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, SRX, T Series
- multipath (Routing Options)
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- EX, M, MX, PTX, QFX, SRX, T Series
- multipath (Protocols BGP)
- M, T Series
- lsp-equal-cost
multipath (Protocols IS-IS)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.6.
Description
Enable load balancing for multiple label-switched paths (LSPs).
Options
lsp-equal-cost | — | Configure LSPs to be retained as equal cost paths for load balancing when a better route metric is added to the routing table. When a route with an improved metric is added to the IS-IS internal routing table, IS-IS flushes all next-hop information (including LSP next-hop information) for a route. This is undesirable, because certain equal-cost multipath (ECMP) path combinations can be lost during route calculation. To override this default IS-IS behavior, include the lsp-equal-cost statement for load balancing, so that the equal cost path information is retained in the routing table. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, SRX, T Series
- multipath (Routing Options)
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- EX, M, MX, PTX, QFX, SRX, T Series
- multipath (Protocols BGP)
- M, T Series
- lsp-equal-cost
Published: 2013-07-22
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, SRX, T Series
- multipath (Routing Options)
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- EX, M, MX, PTX, QFX, SRX, T Series
- multipath (Protocols BGP)
- M, T Series
- lsp-equal-cost