Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

multipoint-destination

Syntax

multipoint-destination address dlci dlci-identifier;
multipoint-destination address {epd-threshold cells;inverse-arp;oam-liveness {down-count cells;up-count cells;}oam-period (disable | seconds);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}vci vpi-identifier.vci-identifier;}

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family family address address],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family  family address address]

Release Information

Statement introduced before Junos OS Release 7.4.

Description

For point-to-multipoint Frame Relay or ATM interfaces only, enable the support of multicast on the interface. You can configure multicast support on the interface if the Frame Relay or ATM switch performs multicast replication.

Options

address—Address of the remote side of the point-to-multipoint connection.

dlci-identifier—For Frame Relay interfaces, the data-link connection identifier.

Range: 0 through 0xFFFFFF (24 bits)

vci-identifier—For ATM interfaces, the virtual circuit identifier.

Range: 0 through 16,384

vpi-identifier—For ATM interfaces, the virtual path identifier.

Range: 0 through 255

Default: 0

The remaining statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-08-01

Previous Page Next Page