Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Example: Configuring Pseudowire Redundancy for Mobile Backhaul Scenarios
pseudowire-status-tlv
Syntax
pseudowire-status-tlv hot-standby-vc-on;
Hierarchy Level
[edit logical-systems logical-system-name protocols l2circuit neighbor address interface interface-name],[edit protocols l2circuit neighbor address interface interface-name],[edit routing-instances routing-instance-name protocols vpls mesh-group mesh-group-name neighbor address],[edit routing-instances routing-instance-name protocols vpls neighbor address]
Release Information
Statement introduced in Junos OS Release 10.0.
Description
Enables the pseudowire type length variable (TLV). The pseudowire status TLV is used to communicate the status of a pseudowire back and forth between two PE routers. The pseudowire status TLV is configurable for each pseudowire connection and is disabled by default.
The remaining statement is explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Example: Configuring Pseudowire Redundancy for Mobile Backhaul Scenarios
Published: 2013-07-31
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- Configuring Interfaces for Layer 2 Circuits
- M, MX, PTX, T Series
- Example: Configuring Pseudowire Redundancy for Mobile Backhaul Scenarios