Navigation
service-set (Services)
Syntax
service-set service-set-name {allow-multicast;extension-service service-name {provider-specific-rules-configuration;}(ids-rules rule-name | ids-rule-sets rule-set-name);interface-service {service-interface interface-name;}ipsec-vpn-options {anti-replay-window-size bits;clear-dont-fragment-bit;ike-access-profile profile-name;local-gateway address;no-anti-replay;passive-mode-tunneling;trusted-ca [ ca-profile-names ];tunnel-mtu bytes;}ip-reassembly-rules rule-name};(ipsec-vpn-rules rule-name | ipsec-vpn-rule-sets rule-set-name);max-flows number;max-drop-flows {ingress ingress-flows;egress egress-flows;}nat-options {stateful-nat64 {clear-dont-fragment-bit}}(nat-rules rule-name | nat-rule-sets rule-set-name);next-hop-service {inside-service-interface interface-name.unit-number;outside-service-interface interface-name.unit-number;outside-service-interface-type local;service-interface-pool name;}(pgcp-rules rule-name | pgcp-rule-sets rule-set-name);(ptsp-rules rule-name | ptsp-rule-sets rule-set-name); service-set-options {bypass-traffic-on-exceeding-flow-limits;bypass-traffic-on-pic-failure;enable-asymmetric-traffic-processing;support-uni-directional-traffic;}snmp-trap-thresholds{flows high high-threshold | low low-threshold;nat-address-port high-threshold | low low-threshold;}}(softwire-rules rule-name | softwire-rule-sets rule-set-name);(stateful-firewall-rules rule-name | stateful-firewall-rule-sets rule-set-name);syslog {host hostname {class {alg-logs;ids-logs;nat-logs;packet-logs;pcp-logs;session-logs <open | close>;stateful-firewall-logs ;}services severity-level;facility-override facility-name;interface-service prefix-value;}}}
Hierarchy Level
[edit services]
Release Information
Statement introduced before Junos OS Release 7.4. The pgcp-rules and pgcp-rule-sets options were added in Release 8.4. The server-set-options option was added in Release 10.1. The ptsp-rules and ptsp-rule-sets options were added in Release 10.2. The softwire-rules and softwire-rule-sets options were added in Release 10.4.
Description
Define the service set.
Options
service-set-name—Identifies the service set.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
