snmp-trap-thresholds
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 13.1.
Description
Configures SNMP flow thresholds for all flows for a service set or flows for all NAT pools configured for a service set..
Options
The remaining options are described separately.
flows high high-threshold—Configure the upper limit for all flows on the service set. The limit is expressed as a percentage of max-flows configured for the service set. When the number of active flows exceeds this limit, an SNMP trap is set.
Default: 90 percent of max-flows
flows low low-threshold—Configure the lower limit for all flows on the service set . The limit is expressed as a percentage of max-flows configured for the service set. When the number of active flows falls below this limit, an SNMP trap is set.
Default: 70 percent of max-flows
nat-address-port high high-threshold—Configure the upper limit for flows for all NAT pools on the service set. The limit is expressed as a percentage of max-flows configured for the service set. When the number of active flows exceeds this limit, an SNMP trap is set.
Default: 90 percent of max-flows
nat-address-port low low-threshold—Configure the lower limit for flows. The limit is expressed as a percentage of max-flows configured for the service set. When the number of active flows falls below this limit, an SNMP trap is set.
Default: 80 percent of max-flows
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
